Description

Specification:
Product Name:3D Window Film;
Size:45×200 cm / 17.8×78.7 Inches;
Material:PVC;
Suitable For : Kitchen, Bedroom, Bathroom, Living Room, Dining Room, Office, Hotels, Classroom, Lobby, etc;

Description:
Save Money For Air-conditions And Heaters:Blocking Out 45-85% Sunlight Heat In Summer; Reducing At Least 30% Warmness Lost In Winter. Size: 17.8 In(W) x 78.7 In(L) Per Roll, Shipping Weight: About 233g;Each single roll is 1-foot wide by 6.5 feet long, which is just the right amount of film to cover 2 narrow, door-side windows.
Protect Your Body Health And Life Safety From Broken Glass:Increasing The Glass Strength Or Keeping Glass Fragments Tightly Attached On The Film By Its Original Shape, No Splashing And No Deformation.
Provide Good Privacy:Protect Skin And Eyes, And Prevent Furniture From Fading And Aging By Blocking Out More Than 96% Harmful Rays And Filtering Strong Light. Show You A Comfortable And Decorative Home Where Has no Disturbance From Dazzling Strong Light And UV Rays When You Are Enjoying The Natural Sunshine.
Easy To Fix, To Remove, And To Reuse:Get The Look Of Frosted Glass By Easy Do-it. No Fading, No Bubbles, Can Be Reused And Has A Long Using Time.
Widely Suitable For Any Places: Kitchen, Bedroom, Bathroom, Living Room, Dining Room, Office, Hotels, Classroom, Lobby, etc.

Feature:
1.Enviromental:All materials of AUGIENB Window films are NON-TOXIC and pollution-free.
2.Recyclability:Self-sticker (No-glue) design makes the window film reusable.Keep the glass clean.
3.Reputably:Excellent texture provides you with privacy and beauty at the same time.

Tips for Installation:
1.A clean and smooth glass surface without any dust, fiber or any kind of texture is needed.
2.The transparent back cover must be peeled off; otherwise, the film will fall off when the water is dry.
3.Do not apply to the window frame. Cut off excessive edges after application if needed.
4.The film may be a little tough and its adhesive effect will be impacted in winter. Solution: use hair dryer or warm water to soft it. ( Heat resistance is under 176).

Sept for Installation:
1.Clean the window glass.
2.Wet the window glass with soapy water.( PS: Mix a little soap or detergent with a lot of water).
3.Measure windows and trim film.
4.Affix tapes on both sides to remove the transparent backing film. (PS: It is a very important step that the window film cannot be stuck if it is ignored).
5.Install the film to the glass.
6.Squeeze out water and air bubbles with a smooth tool, such as a credit card or a spatula. (No spatula or squeegee is included in this item).

Package Included:
1 x 3D Window Film